TECHNICAL BULLETIN #37 - Rev 1.00 (8/1/96)

==============================================================================
TITLE   : Configuring PROCOMM PLUS for Non-Standard Ports
PRODUCT : PROCOMM PLUS 2.01 (DOS)
==============================================================================

This document explains how to configure PROCOMM PLUS for custom Base Port
Addresses (BPA's) and Interrupt Request Lines (IRQ's).

PROCOMM PLUS is capable of talking to COM ports 1-8 using IRQ's 2-7.  Follow
these steps to manually configure PROCOMM PLUS for specialized BPA's and
IRQ's.

1. At the DOS prompt change to the PROCOMM PLUS home directory (\PCPLUS by
   default).

2. Type "PCSETUP" and press <enter> to start the Setup Utility. Use the arrow
   keys to highlight MODEM OPTIONS and press <enter>.

3. Highlight PORT ASSIGNMENTS and press <enter>.

4. Press the appropriate letter to access the COM port you need to change.
   This will place your cursor in the Base Port Address field. (Right behind
   the "x")

5. Enter the appropriate BPA and press <enter>.  For a list of default base
   port addresses please refer to the table below for a listing of default
   BPA's.
                           +---------------+----------+
                           | PC Compatible | IBM PS/2 |
                    +------+---------------+----------+
                    | COM1 |     0x03F8    |  0x03F8  |
                    +------+---------------+----------+
                    | COM2 |     0x02F8    |  0x02F8  |
                    +------+---------------+----------+
                    | COM3 |     0x03E8    |  0x03220 |
                    +------+---------------+----------+
                    | COM4 |     0x02E8    |  0x03228 |
                    +------+---------------+----------+

6. Enter the appropriate IRQ and press <enter>.

7. Press <Esc> three time to exit the Setup Utility.

8. PROCOMM PLUS will open a message window and prompt "Make
   changes permanent? Y/N".  Press <Y> to save the settings.

==========================================================================
 To ensure that you have the latest version of this document, compare its
 revision number to that of the same document on any of our support sites.
This technical bulletin may be copied and distributed freely as long as it
     is distributed in its entirety and it is not distributed for profit.
         Copyright (c) 1997 Quarterdeck  All rights reserved.
==========================================================================